Code CR4100 Quick Start Manual de usuario descargar pdf (Pagina 6)

C006244_01_CR4100_QuickStart_Guide

2.0 - Inserng the Baery

1. Using the at poron of the stylus (Figure 1), insert the tool into the slot on the baery

cover located on the back of the unit (Figure 2). Rotate the slot clockwise from LOCK to

UNLOCK.

2. Making sure a poron of the strap is exposed (Figure 3), insert the baery such that

the contacts of the baery are aligned with the pins inside the CR4100 (Figure 4).

3. Place the cover back on the CR4100.

4. Using the at poron of the stylus, rotate the slot counterclockwise from UNLOCK to

LOCK (see Figures 1 & 2).

2.1 - Removing the Baery

1. Using the at poron of the stylus (Figure 1), insert the tool into the slot on the baery

cover located on the back of the unit (Figure 2). Rotate the slot clockwise from LOCK to

UNLOCK.

2. Pull on the strap, and the baery will pop out.

3. Insert a new baery, or leave empty (see Secon 2.0 - Inserng the Baery).

4. Place the cover back on the CR4100.

5. Using the at poron of the stylus, rotate the slot counterclockwise from UNLOCK to

LOCK (see Figures 1 & 2).

2.2 - Aaching/Removing the Hand Strap

1. To aach the hand strap, using a Philips head screwdriver and supplied screws, aach

the top poron of the hand strap to the back of the CR4100 (Figure 5).

2. Slide the plasc key on one end of the hand strap into the slot on the boom of the

CR4100 (Figure 6).

3. To remove the hand strap, slide the plasc key on the end of the handstrap out of

the slot at the boom of the CR4100 (Figure 6) and use a Philips head screw driver to

remove the screws in the top poron of the hand strap (Figure 5).

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Code CR4100 Quick Start Manual de usuario Pagina 6