
Code Reader™ 3500 (CR3500) - Wireless
Quickstart Guide
C004419_03_CR3500_Quickstart_Wireless
Included with your Wireless CR3500
Depending on the reader conguraon ordered, you will have received one of the
following with your CR3500:
Baery Cartridge Baery Handle
Installing a Baery Cartridge
1. To install a baery, place the plasc tab on the boom
of the baery cartridge into the slot on the reader.
Slide the locking mechanism up, and press the baery
into place. Slide the locking mechanism down to
secure the baery.
2. To detach a baery, slide the locking mechanism on
the reader up and pull the baery cartridge up and
away from the slot on the reader.
Note: Baery ships with approximately 50% baery life. Fully charge baery before use.
Approximate charge me is 4 hours when baery depleted.
CR3500’s unique targeng funcon uses two converging
targeng LEDs to guide the user to opmal reading range.
Reading Tips
Quick Tips
1. Press either trigger buon to turn the reader
on, or to scan a bar code.
2. Press the So Key, under ‘Opons’ to:
manually enter data, view stored data,
connect to a Bluetooth device, send all stored
data to a PC, and change reader sengs.
3. Use the arrow buons to navigate through
lists, data and more.
4. Use the Enter buon to select an item.
Visit www.codecorp.com to download the CR3500
User Manual for a complete reference guide of CR3500
funcons.
The reader is too far from a
bar code (more than 12”
from the bar code reader).
The reader is too close to a
bar code (less than 1”
from the bar code reader).
The opmal distance to read
most bar codes is 3-4” away
from the bar code reader.
© 2012. Code Corporaon. All Rights Reserved.
4
Comentarios a estos manuales